Mounting - Siemens SITRANS F M MAG 3100 Operating Instructions Manual

● Remove the blanks immediately before mounting the sensor
4.5

Mounting

● Install the sensor in rigid pipelines in order to support the weight of the meter.
● Center the connecting pipelines axially in order to avoid turbulent flow profiles.
● Use proper gaskets according to liner type
SITRANS F M MAG 3100
Operating Instructions, 06/2010, A5E03005599-01
Figure 4-8 Removing blanks
CAUTION
Do not use sharp objects to remove the blanks as this can damage the liner!
Figure 4-9 Correct installation with gaskets
Installing/Mounting
4.5 Mounting
27