Installation With Earthing Flanges - Siemens SITRANS F M MAG 3100 Operating Instructions Manual

4.7

Installation with earthing flanges

CAUTION
Only sensors with PTFE or PFA liners
Installation with earthing flanges is only relevant for sensors with PTFE or PFA liners
● Mount earthing flanges where necessary on non conductive pipes.
Installation with earthing flanges on sensors
with PTFE liner
NOTICE
Potential equalization
For potential equalization one earthing flange is sufficient even for bidirectional flow.
By unidirectional flow the earthing flange must be mounted on the inlet side.
● Connect the earthing flanges to the sensor with the enclosed earthing straps.
Earthing strap connection on type E earthing
rings
SITRANS F M MAG 3100
Operating Instructions, 06/2010, A5E03005599-01
4.7 Installation with earthing flanges
Installation with flat earthing ring on sensors
with PFA liner
Earthing strap connection on flat earthing
rings
Installing/Mounting
31