Remote Installation - Siemens SITRANS F M MAG 3100 Operating Instructions Manual

● To guarantee the IP 67 degree of protection, use cables with the required specifications.
See also
Cable data (Page 53)
5.2

Remote installation

NOTICE
Remote installation only
The following applies to remote installation of MAG 5000 / 6000 or MAG 6000 I.
1. Unscrew and remove terminal box lid.
SITRANS F M MAG 3100
Operating Instructions, 06/2010, A5E03005599-01
WARNING
Protective conductor terminal
The required cable is min. AGW16 or 1.5 Cu.
WARNING
Wire insulation
The insulation between the connected mains supply and 24 V AC/DC supply for the
flowmeter must at least be rated with double or reinforced insulation at mains voltage.
For field wiring installation: Ensure that the National Installation Code of the country in
which the flowmeters are installed is met.
Connecting
5.2 Remote installation
35