Tools needed for assembly: Crosshead screwdriver, 10mm A/F Spanner.
NOTE:
When assembling the barbecue, ensure it is sitting on a flat surface.
Insert 4 casters on the bottom panel by pushing them in�
8
ASSEMBLY INSTRUCTIONS
Product Description
Carton Identification
Product Part Number
Open the carton by removing the shipping
straps then slitting along both ends� Cut the
tape only by a small amount in the middle,
finish by lifting the carton flaps with your hand�
Unpack the entire carton, this carton will be
used as a surface protector as the cabinet is
being built� Open the carton as shown and
place where the BBQ will be assembled
STEP 1
FIGURE 1