Masport LIFESTYLE 3 Owner's Manual page 4

Position the Trolley Back Panel (9) between the Left and Right Cabinet Panels (2 and 3) and lower it until it rests on the Trolley Base (4).
Securely attach the Rear Trolley Panel (9) using 60mm Screws (20) inserted through the Left and Right Trolley Panels (2 and 3).
2
4
Position and lower the Door Brace (10) between the top/inside sections of the Left and Right Cabinet Panels (2 and 3). Attach the Door
Brace (10) by inserting M6x10 Screws (23) from inside the opening of the Door Brace (10) and into the Left and Right Cabinet Panels (2 and
3).
10
3
9
To install doors (11, 12), locate the bottom door pin into the hole first, then push down the spring location pin on the top of door, locating it
into the top hole and allow to spring into place.
Spring loaded
pivot pin
2
10
11
3
12
6
STEP 3
9 9
20
3
3
20
STEP 4
10
23
2
3
STEP 5
Barbecues fitted with a cabinet top panel:
Position this in place, inside the four side
Spring
loaded 10 retainers prior to fitting the Hood/Grill assembly.
pivot pin
11
4
Assemble the bottle opener (25) using 2pcs Screw M6x10 (23).
23
23
Remove all packaging from inside the Hood (1). Remove the cooking grill and plate. The Hood/Grill assembly is very heavy and requires two
persons to lift it into place. Lift and lower the Grill Body Assembly (1) onto the (inside) retainers of the Left Cabinet Panel (2) and the Right
Cabinet Panel (3). Attach the Grill Body Assembly using M6x10 Screws (23).
1
2
The hood is packaged without the temperature gauge being assembled.
STEP 6
25
STEP 7
23
3 23
7