Front Panel Lockout - Barco ACS-2048 User Manual

4. Operation

Front Panel Lockout

cêçåí=m~åÉä=içÅâçìí
The ACS-2048 includes a front panel lockout mode which when enabled, locks out the front
panel from all source selections, including the Test Pattern.
Use the following steps to lock (and unlock) the front panel:
1.
Figure 4-47. System message: Lockout Enabled
2.
72
Press and hold the SEL and ESC buttons for 3 seconds. Once this button
combination has been detected, the following display appears:
Fro nt Panel
L oc k o u t E n a b l e d
In the "lockout" mode:
~
All button pushes and all turns of the rotary knobs will be ignored.
~
All Ethernet communications and commands will function normally.
~
All button lights will continue to reflect the proper state of the inputs.
To disable the front panel lockout mode, press and hold the SEL and ESC buttons
for 3 seconds. Once detected, the system returns to the previous menu that was
shown before the "lockout" mode was enabled.
ACS-2048 • User's Guide