Barco ACS-2048 User Manual page 34

4. Operation
Quick Setup and Operations
10. Connect inputs — Connect all inputs to the ACS-2048, and check for the proper
11. Select and adjust inputs — As required, select an input, and perform the
12. Save input configuration — After completing all adjustments for an input, select
13. Repeat for each input — repeat steps 10 and 11 for each input that you have
14. Adjust system parameters — As required, adjust all desired system parameters
15. Save system configuration — After completing all system adjustments, save the
16. Ready to roll — With all output, input and system configurations saved, press the
34
backlight, which indicates that sync is detected. (Chapter 3,
on page 29. This chapter,
necessary adjustments, such as crop, brightness, contrast, color balance, and
timing. (This chapter, "Input
a file number and save the input configuration. (This chapter,
Config" on page 51.)
connected to the ACS-2048.
such as transition time, display brightness, and your user preferences. (This
chapter, "System Menu" on page 57.)
system configuration. (This chapter,
desired input button, and begin your presentation. Ensure that the button is lit,
indicating that the signal is valid.
Note For advanced system operations, specific system "tweaks"
and operating descriptions on every feature, please start with
the "Quick Function
select the function that you wish to perform.
"Understanding Backlighting" on page 69.)
Menu" on page 43.)
"Save System Config" on page 65.)
Reference" section on page 38, and
"Signal Installation"
"Save Input
ACS-2048 • User's Guide