Diagnostics - Barco ACS-2048 User Manual

aá~ÖåçëíáÅë
From the System Menu, select Diagnostics to display the Diagnostics Menu:
DI AGNOS TIC S
> SE L = Sta rt T ests
Figure 4-39. Diagnostics Menu
If you suspect a problem with the ACS-2048, press SEL to run a series of internal
diagnostic tests. The menu will report back "PASS" or "FAIL."
p~îÉ=póëíÉã=`çåÑáÖ
From the System Menu, select Save Config to save all current "system" settings so that
they may be restored at power up. A message is briefly shown, after which the ACS-2048
returns to the System Menu.
Figure 4-40. Saving System Configuration Message
Please note the following important points regarding the system configuration file:
•
•
•
ACS-2048 • User's Guide
Note If the menu report "FAIL," please contact Barco Customer
Service. They will assist you with troubleshooting.
S a v i n g S y s t e m C o n f i g . . .
When you perform the Save Config function, all configuration parameters from
the System Menu are saved in non-volatile memory. If you do not perform the
function, data will not be restored upon the next system power up sequence.
This command also saves the currently selected input channel as the default
selection upon power up.
Note If you want the ACS-2048 to always power up and acquire an
input other than input 1, perform the Save System State
command while the desired input is selected.
If you do not perform the Save System State function, data will not be restored
upon the next system power up sequence.
4. Operation
Using the Main Menu
65