Signal Installation; Format Connection Table - Barco ACS-2048 User Manual

páÖå~ä=fåëí~ää~íáçå
The figure below illustrates a sample ACS-2048 system diagram. Use this figure for
reference during the signal installation process.
Sample
Source Input
Devices
Figure 3-2. ACS-2048 System Diagram (sample)
Use the following steps to install signals to/from the ACS-2048:
1.
ACS-2048 • User's Guide
Input 1 (HD/SD SDI)
Input 2 (DVI)
Input 3 (DVI)
Input 4 (Analog)
Input 5 (Analog)
Input 6 (Composite)
Input 7 (S-Video)
Input connections — any combination of inputs can be connected. If the system
detects valid sync on the input signal, the associated front panel input button will
light dim (backlight enabled). If sync is not detected, the button will not light.
a. Connect an HD-SDI or SD-SDI source to the Input 1 connector (e.g.,
from an SDI camera or SDI server).
b. Connect a digital DVI or analog RGBHV source to the Input 2 connector
(e.g., from a laptop or PC). This input does not support Composite,
S-Video, or YUV formats.
c. Connect a digital DVI or analog RGBHV source to the Input 3 connector.
Inputs 2 and 3 are identical. This input does not support Composite,
S-Video, or YUV formats.
d. Connect a YUV or RGBHV source to the Input 4 connector (e.g., from a
YUV or RGB source, or a laptop). This input does not support
Composite or S-Video formats. Refer to the
Table" section on page 30 for a table of analog input combinations.
e. Connect a YUV or RGBHV source to the Input 5 connector. Inputs 4
and 5 are identical. This input does not support Composite or S-Video
formats. Refer to the
for a table of analog input combinations.
f. Connect a Composite NTSC or PAL source to the Input 6 connector
(e.g., from an analog camera).
g. Connect an encoded NTSC or PAL Y/C source to the Input 7 connector
(e.g., from an S-Video source, such as a DVD player).
Note Input 8 is currently not implemented.
ACS-2048
Ethernet
Switch
"Format Connection
"Format Connection Table" section on page 30
3. Installation

Signal Installation

DVI Out A
Barco
DP Series
DVI Out B
Projector
29