Barco ACS-2048 User Manual page 61

The following functions are available:
•
•
•
Figure 4-31. Programming EDID Message 1
Figure 4-32. Programming EDID Message 2
If the EDID programming failed, the following message will be displayed:
Figure 4-33. EDID Programming Failed Message
If this message persists, please contact customer service for technical support.
ACS-2048 • User's Guide
Input — selects the exact inputs that you wish to program: ALL (inputs 2 and 3),
2 (individually), or 3 (individually).
EDID Format — This line displays the system's current EDID format, and enables
you to select a new EDID format to program into non-volatile memory. As
required, press SEL to scroll through the formats.
Program EDID — Select this function to program the preferred DVI resolution, as
defined on the EDID Format line. When SEL is pressed, the following message
is briefly displayed.
P r o g r a m m i n g E D I D
Please wait ...
If the non-volatile memory programming is successful, the following message is
displayed:
E D I D P r o g D o n e
Connect DVI inpu ts
and reboo t the PC
ES C = Con tinue
Note At this point, reboot the external computer(s) in order for the
new EDID information to be read, and the new preferred
resolution to become available.
E D I D P r o g f a i l e d !
ES C = Con tinue
4. Operation
Using the Main Menu
61