Save; Selmode; Remote Commands - Barco ACS-2048 User Manual

_K==oÉãçíÉ=`çåíêçä=mêçíçÅçä

Remote Commands

Table B-1. ACS-2048 Remote Commands (Continued)
Command

SAVE

SELMODE

SUBNET
TEMP
TRNTIME
VER
VFDBRT
oÉãçíÉ=`çãã~åÇë
This section lists ACS-2048 remote commands.
^rql^`n
•
•
•
•
•
^rqlp^sb=
•
•
•
•
•
_ihsfa
•
•
•
•
•
98
System Save
Sets whether input selection of inputs w/o valid syncs will be made
Set subnet mask to be used when DHCP is OFF
Query only command for the temperature of the unit
Set transition time
Display Version info
Set VFD brightness
Description: Auto Input Acquisition Mode.
Command Format: AUTOACQ -m (mode)
Command Params: -m mode: 0-off, 1-on (Default: on)
Query Format: AUTOACQ -?
Query Response: AUTOACQ -m (mode) --min 0 --max 1
Description: Auto Input Settings Save
Command Format: AUTOSAVE -m (mode)
Parameters: -m (mode): 0 - off, 1 - on (default: off)
Query Format: AUTOSAVE -?
Query Response: AUTOSAVE -m (mode) --min 0 -- max 1
Description: Puts black into the scaler selected.
Command Format: BLKVID -s (scaler) -m (mode)
Parameters:
-s (scaler): 1 - 2
-m (mode): 0 - off, 1 - on
Query Format: N/A
Query Response: N/A
Description
ACS-2048 • User's Guide
Page
105
105
106
106
106
106
106