Upgrading Software - Barco ACS-2048 User Manual

5. Upgrading Software

Software Upgrade Overview
pçÑíï~êÉ=réÖê~ÇÉ=lîÉêîáÉï
Firmware files for the ACS-2048 are loaded into the hardware at power-up. These files are
stored in the unit's onboard flash memory.
The ACS-2048's system software can be easily upgraded using the following steps:
•
•
•
•
•
e~êÇï~êÉ=oÉèìáêÉãÉåíë
The following hardware items are required for upgrading ACS-2048 software:
•
•
pçÑíï~êÉ=oÉèìáêÉãÉåíë
The following list outlines software requirements for upgrading ACS-2048 software:
•
•
Software files can be downloaded from either the Barco Folsom FTP site or the Barco
website, as described in the following
74
Downloading the appropriate "upgrade" file from the Barco FTP site or website
Connecting a PC (or laptop) to the ACS-2048
Launching a web browser
Connecting to the ACS-2048 using its IP address
Following the upgrade instructions in the browser
IBM compatible computer with an available Ethernet port.
Local Ethernet network, including an Ethernet switch
Ensure that your PC (or laptop) uses the Windows
systems.
Ensure that your PC (or laptop) has a web browser installed, such as Windows
®
Internet Explorer or Mozilla Firefox
®
2000 or XP operating
®
.
"Downloading Software" section.
ACS-2048 • User's Guide