Barco ACS-2048 User Manual page 45

•
•
•
Please note:
•
•
`çäçêëé~ÅÉ
From the Input Menu, select Colorspace to change the color space for the selected input.
Values depend on the selected input:
•
•
•
•
•
•
•
Please note:
•
•
•
ACS-2048 • User's Guide
For inputs 4 and 5: [Analog]
For input 6: [CVBS]
For input 7: [Y/C]
If a source type is chosen and a correct signal cannot be detected, the Input
Format field (in the Input Menu and the Status Menu) indicates "Invalid Signal."
For inputs 2 and 3, analog signals can be connected to the ACS-2048 using a
customer-supplied DVI to HD-15 adaptor.
For input 1: [SMPTE]
For input 2: RGB, SMPTE
For input 3: RGB, SMPTE
For input 4: RGB, SMPTE
For input 5: RGB, SMPTE
For input 6: [SMPTE]
For input 7: [SMPTE]
The default selection for YP
"Input Format Table" section on page 89 for information on the formats that are
RGB, SMPTE or both. When both RGB and SMPTE are listed, the first item in the
list is the default.
When the input is analog (including CVBS, Y/C or DVI), you can select between
RGB and SMPTE.
When the following formats are detected as SD/SDI or HD/SDI, only [SMPTE] is
shown, and this color space is unchangeable.
~
NTSC (480i)
~
PAL (576i)
~
1280x720p @50
~
1280x720p @59.94
~
1280x720p @60
~
1920x1080p @23.98
~
1920x1080p @24
~
1920x1080p @25
P or YUV is SMPTE. In Appendix A, refer to the
b r
~
~
~
~
~
~
~
4. Operation
Using the Main Menu
1920x1080p @29.97
1920x1080p @30
1920x1080sF@23.98
1920x1080sF@24
1920x1080i @50
1920x1080i @59.94
1920x1080i @60
45