Beckman Coulter COULTER EPICS XL Service Manual page 338

SERVICE AND REPAIR PROCEDURES
UNIVERSAL CD-ROM DRIVER SETUP
9. At the C:\> prompt (DOS prompt), type editßconfig.sys
a. Add this line:
DEVICE=C:\OAKCDROM.SYS/D:MSCD000
b. Save and close the file.
c. At the DOS prompt (C:\), type editßautoexec.bat.
d. In the autoexec.bat file:
1)
2)
3)
4)
5)
10. Remove the floppy disk from the A: drive.
11. Reboot the computer.
a. Click on the Windows
b. Select
c. When the Microsoft Windows Startup Menu appears, highlight
MS-DOS
12. The CD-ROM should now be seen in DOS. If you did this setup as part of installing the
LANtastic software option, go back to
at Heading Software Installation, Client
4.22-2
Make sure the line C:\DOS\MSCDEX.EXE/D:MSCD000 is displayed. If not,
add the line, then save and close the file.
Press ç as many times as necessary to reach the line that displays: CD\XL
Type REM in front of the line.
Press ç as many times as necessary to reach the line that displays: XL2.
Type REM in front of the line.
Start button tt
Restart the computer? and click on
and press Û.
Shut Down .
Yes .
Heading 3.15 and continue the procedure starting
Setup. Complete the procedure as written.
8. Previous version of
PN 4237029F