INSTALLATION PROCEDURES
SERIAL/PARALLEL ADAPTER INTERFACE CARD OPTION
4.
Plug the ac power line cords into appropriate wall outlets and turn the Computer
Workstation on.
5.
Check to see if any system card conflict messages display on the monitor:
If no system card conflict messages display on the monitor go to the next step (6).
r
If system card conflict messages display on the monitor:
r
t
t
t
Table 3.13-1 CMOS Settings
Item
LPT1
LPT2
COM1
COM2
COM3
COM4
At the MS-DOS prompt, type MSD and press Û.
6.
Verification
Verify that the COM port status shows 4 COM ports and that there are 2 LPT ports.
3.13-2
Repeat steps
1
through 5.
Refer to the OEM manual.
Check the CMOS settings and ensure that they match
Setting
378
278
3F8
2F8
3E8
2E8
Table
3.13-1.
PN 4237029F