ABB Busch-priOn Series Technical Reference Manual page 45

Pos: 22.106 /Produkthandbuch - DIN-A4/Überschriften/2. Ebene/S - T/Tor @ 10\mod_1269512122627_15.doc @ 53183 @ 22
Gate
Pos: 22.107 /KNX/Applikationsbeschreibungen/Applikationen - App/Tor/App. - Tor - DIN-A4 @ 10\mod_1269511957207_15.doc @ 53178 @
The "Gate" application allows specific signals to be filtered and the signal flow to be temporarily blocked. The function has
three communication objects: "Control input", "Input" and "Output".
The input or output object can assume different sizes.
The bit size can be freely assigned with the "Not assigned" setting. This means that the first internal or external group
address/action that is assigned and already connected to some other communication object will specify the size.
The control can occur from "Input to output" or also from "Output to input", provided the control input allows this. Enabling
via the control input can occur via an ON or an OFF telegram.
If, for example, the "Control input" setting is set to "ON telegram", only telegrams from the input are transmitted to the
output, if prior to this the control input has received an ON telegram.
It is also possible to block signals via the "Filter function" setting. Either "nothing is filtered out" or the signal "ON is filtered
out" or the signal "OFF is filtered out". This function is always necessary, for example, when only the ON telegram is
interesting for a sensor and the sensor does not offer any filter function in its application program.
Gate objects
No. Object name
0 Input
1 Output
2 Control input
Pos: 22.108 /Spezial/Neues Layout 2010/Steuermodule_Neues_Layout_2010/++++++++++++ Seitenumbruch ++++++++++++ @ 9\mod_1268898668093_0.doc @ 52149 @
Data type
-
-
1 Bit EIS1 / DPT 1.001
KNX Technical Reference Manual | 0073-1-7388 | 45
Flags
C, W, T
C, W, T
C, W