Media Control, Radio - ABB Busch-priOn Series Technical Reference Manual

KNX Technical Reference Manual
Busch-priOn
Pos: 22.44 /Produkthandbuch - DIN-A4/Überschriften/2. Ebene/M - O/Mediensteuerung Radio @ 9\mod_1269500818782_15.doc @ 52860 @ 2

Media control, radio

Pos: 22.45 /KNX/Applikationsbeschreibungen/Display - GUI/Mediensteuerung Radio/App. - Mediensteuerung Radio - DIN-A4 @ 9\mod_1269500514614_15.doc @ 52855 @
A radio can be remotely controlled via the bus using the "Media control, radio" application.
The symbols for "On/Off", "Radio station selection" and "Volume" are shown first on the display. Via the push-button/rotary
control element, the user can access a submenu ("Radio station selection" and "Volume") or can switch directly on or off via
a push-button operation.
The stations that can be selected are listed in the "Radio station selection" submenu. By turning the
push-button/rotary control element, the user can select the desired station (focus) and call it up via a push-button operation.
If the volume is to be regulated, a special volume symbol is shown on the display which signals the user that: a turn to the
right increases the volume and a turn to the left reduces the volume. A feedback signal from the connected actuator can not
be shown here.
Depending on the function, telegrams for radio control are sent out on the communication objects for "Radio On/Off",
"Station selection" and "Radio volume".
In addition, the function can be temporarily blocked via an additional 1-bit "Enable" communication object.
Hint:
The function is practical only if a corresponding actuator (audio actuator) for radio activation is used as receiver for the sent
out telegrams.
Media control objects, radio
No. Object name
0 Enable
0 Radio On, Off
0 Station selection
0 Radio volume
Pos: 22.46 /Spezial/Neues Layout 2010/Steuermodule_Neues_Layout_2010/++++++++++++ Seitenumbruch ++++++++++++ @ 9\mod_1268898668093_0.doc @ 52149 @ 22
30 | 0073-1-7388 | KNX Technical Reference Manual
®
Data type
1 Bit EIS1 / DPT 1.001
1 Bit EIS1 / DPT 1.001
1 Bit EIS14 / DPT 5.010
4 Bit EIS2 / DPT 3.007
Flags
C, W, U
C, W, T, U
C, T
C, T