Dimming, Rocker Left/Right - ABB Busch-priOn Series Technical Reference Manual

Knx technical reference manual

Table of Contents

KNX Technical Reference Manual

Busch-priOn

Pos: 22.9 /Produkthandbuch - DIN-A4/Überschriften/2. Ebene/A - F/Dimmen, Wippe Links / Rechts @ 9\mod_1269423462609_15.doc @ 52694 @ 2

Dimming, rocker left/right

Pos: 22.10 /KNX/Applikationsbeschreibungen/Applikationen - App/Dimmen_Wippe_links_rechts/App. - Dimmen, Wippe links / rechts - DIN-A4 @ 9\mod_1269423217171_15.doc @ 52689 @ 2

With the "Dimming, rocker left/right" application, a rocker switch has communication objects for switching and for dimming. A

distinction is made between short (switching) and long (dimming) button contact.

The "Dimming, rocker left/right" application does not differentiate between whether the rocker is operated on the left or right

side. In each case, the application makes a separate set of parameters and communication objects available for the right

and left side of the rocker.

The application makes it possible to dim a light via one side of the rocker and to assign an additional "button-orientated"

function to the other side.

Dimming objects, rocker left/right

No.

Object name

Switching

Relative dimming

Pos: 22.11 /Produkthandbuch - DIN-A4/Überschriften/2. Ebene/G - L/Jalousie, Wippe Gesamt @ 9\mod_1269423899109_15.doc @ 52704 @ 2

Blind, rocker total

Pos: 22.12 /KNX/Applikationsbeschreibungen/Applikationen - App/Jal_Wippe_gesamt/App. - Jalousie, Wippe Gesamt - DIN-A4 @ 9\mod_1269423548328_15.doc @ 52699 @

Via the application "Blind, rocker total", blind movement and/or slat adjustment commands can be sent to connected shutting

actuators with a short or long contact of the rocker. A short button contact always triggers a slat adjustment or stop

command and a long button contact always triggers a move command.

The control always remembers the last action performed on the side of the rocker switch that is assigned with the "Blind,

rocker total" application. If a blind was lowered and halted at half height via a short button contact, then a renewed long

button contact will raise the blind.

Blind objects, rocker total

No.

Object name

Adjusting(1 Bit)

Adjusting (1 Byte)

Move (1 Bit)

Move(1 Byte)

Pos: 22.13 /Produkthandbuch - DIN-A4/Überschriften/2. Ebene/G - L/Jalousie, Wippe Links / Rechts @ 9\mod_1269424455828_15.doc @ 52715 @ 22

Blind, rocker left/right

Pos: 22.14 /KNX/Applikationsbeschreibungen/Applikationen - App/Jalousie_Wippe_links_rechts/App. - Jalousie, Wippe Links / Rechts - DIN-A4 @ 9\mod_1269424218921_15.doc @ 52710 @

Via the application "Blind, rocker left/right", blind movement and/or slat adjustment commands can be sent to connected

shutting actuators with short or long actuation of the rocker. A short button contact always triggers a move command and a

long button contact always triggers a slat adjustment or stop command.

The application "Blind, rocker left/right" makes a separate set of parameters and communication objects available in each

case for the right or left side of the rocker. This facilitates control of a Venetian blind with one side of the rocker and

assigning an additional "Rocker, left/right" function to the other side of the rocker.

The control always remembers the last action performed on the side of the rocker that is assigned with the "Blind, rocker

left/right" application. If a blind was lowered and halted at half height via a long button contact, then a renewed short button

contact will raise the blind.

Blind objects, rocker left/right

No.

Object name