Unit Blockage - ABB Busch-priOn Series Technical Reference Manual

Pos: 22.63 /Produkthandbuch - DIN-A4/Überschriften/2. Ebene/G - L/Gerätesperre @ 9\mod_1269507282299_15.doc @ 52987 @ 2

Unit blockage

Pos: 22.64 /KNX/Applikationsbeschreibungen/Display - GUI/Geraetesperre/App. - Gerätesperre - DIN-A4 @ 9\mod_1269507196912_15.doc @ 52982 @ 22
The operation of the display from the circuit menu, or the call-up of individual functions, can be protected against
unauthorised access by means of a PIN. Entering the correct pin allows the device to be operated.
If a function is protected by a PIN, a lock symbol is shown on the display in front of the function description.
Hint:
Only one PIN can be assigned to each unit. If a wrong PIN is entered, there is no limit to the number of times the entry can
be repeated.
Pos: 22.65 /Produkthandbuch - DIN-A4/Überschriften/2. Ebene/P - R/RTR-Einstellungen @ 9\mod_1269507439823_15.doc @ 53008 @ 2
RTC settings
Pos: 22.66 /KNX/Applikationsbeschreibungen/Display - GUI/RTR-Einstellungen/App. - RTR-Einstellungen - DIN-A4 @ 9\mod_1269507357936_15.doc @ 53003 @
Default settings for the internal room temperature controller can be set with the "RTC settings" application. The room
temperature controller can be used for "Heating", "Cooling" as well as for "Heating and Cooling". There is also the option of
controlling fan coil actuators.
Pos: 22.67 /Produkthandbuch - DIN-A4/Überschriften/2. Ebene/S - T/Sequenzaktoreinstellungen @ 9\mod_1269508040953_15.doc @ 53019 @ 222
Sequence actuator settings
Pos: 22.68 /KNX/Applikationsbeschreibungen/Applikationen - App/Sequenzaktoreinstellungen/App. - Sequenzaktoreinstellungen - DIN-A4 @ 9\mod_1269507712999_15.doc @ 53014 @
With the "Sequence actuator settings" application and the press of the push-button/rotary control element it is possible to
consecutively send out multiple telegrams with different values in a predefined sequence via the same object.
The representation of a sequence on the display is based on the representation of a scene. In contrast to the "Scene", the
"Sequence actuator settings" application has only one communication object on which up to twelve individual values are
consecutively sent out in twelve firmly set times. The times can be freely set from 1 s to 12 h. The "Sequence actuator
settings" application lends itself to controlling showrooms for example.
If sequences are configured, they are listed together with scenes under menu item "Scenes" and can be started from there.
Values and delay times are edited under the "Scenes" menu item.
Via the "Quick run" function, the brightness values can be started up at an accelerated rate. The delay time then amounts to
a constant 3 s from value to value.
Sequence actuator settings objects
No. Object name
0 Enable
1 Sequence value (1 Bit)
1 Sequence value (1 Byte 0..100 %)
1 Sequence value (1 Byte 0..255)
1 Sequence value (1-byte light scene number)
1 Sequence value (2 Byte Float)
1 Sequence value (2 Byte Unsigned)
2 Sequence start-stop
3 Sequence status
Pos: 22.69 /Spezial/Neues Layout 2010/Steuermodule_Neues_Layout_2010/++++++++++++ Seitenumbruch ++++++++++++ @ 9\mod_1268898668093_0.doc @ 52149 @ 2
Data type
1 Bit EIS1 / DPT 1.001
1 Bit EIS1 / DPT 1.001
1 Byte EIS6 / DPT 5.001
1 Byte EIS14 / DPT 5.010
1 Byte / DPT 18.001
2 Byte EIS5 / DPT 9.xxx
2 Byte EIS10 / DPT 7.001
1 Bit EIS1 / DPT 1.001
1 Bit EIS1 / DPT 1.001
KNX Technical Reference Manual | 0073-1-7388 | 35
Flags
C, W, T
C, T
C, T
C, T
C, T
C, T
C, T
C, W, U
C, T