Messages - ABB Busch-priOn Series Technical Reference Manual

KNX Technical Reference Manual
Busch-priOn
Pos: 22.58 /Produkthandbuch - DIN-A4/Überschriften/2. Ebene/M - O/Meldungen @ 9\mod_1269505427898_15.doc @ 52915 @ 22

Messages

Pos: 22.59 /KNX/Applikationsbeschreibungen/Display - GUI/Meldungen/App. - Meldungen - DIN-A4 @ 9\mod_1269505283373_15.doc @ 52910 @ 2
Messages can be shown on the display and acoustically signaled over the internal loudspeaker. These can be predefined
system messages such as "Storage medium was removed" or freely definable messages. A maximum of ten messages
(message texts) can be created. The displayed message text is restricted to 48 characters.
Every message is assigned a priority (warning level) which determines the display of the message window. Information and
alarm messages are indicated by a green bar. Warnings have a red bar and alarm messages appear completely red.
One or several active messages are shown in the display as soon as the user calls up the circuit menu. The circuit menu is
only shown after all pending messages have been confirmed with "OK". The order in which the messages are issued is
adjustable.
Should a message become active while a user is operating the device, this will be shown immediately. When the primary
function is active, pending messages in the status line are shown by a blinking symbol. Depending on the message priority,
a different symbol is used here. If several messages are active, the message symbol with the highest priority is always
shown.
Message objects
No. Object name
0 Message
1 Acknowledgement
Pos: 22.60 /Produkthandbuch - DIN-A4/Überschriften/2. Ebene/S - T/Text für Titel @ 9\mod_1269507114151_15.doc @ 52976 @ 2
Title text
Pos: 22.61 /KNX/Applikationsbeschreibungen/Applikationen - App/Text für Titel/App. - Text für Titel - DIN-A4 @ 9\mod_1269506694622_15.doc @ 52971 @ 22
The text/value display should be provided with a descriptive text that makes sense so that the user can recognise which text
is displayed. For example, "Outside temperature", "Wind speed", "Bedroom window open", etc.
The descriptive text is shown in the display during scrolling and appears in the top left if the function is selected (focused).
Title text objects
No. Function
0 Text / Value
0 Text / Value
0 Text / Value
0 Text / Value
0 Text / Value
0 Text / Value
0 Text / Value
0 Text / Value
0 Text / Value
0 Text / Value
0 Text / Value
0 Text / Value
0 Text / Value
0 Text / Value
0 Text / Value
Pos: 22.62 /Spezial/Neues Layout 2010/Steuermodule_Neues_Layout_2010/++++++++++++ Seitenumbruch ++++++++++++ @ 9\mod_1268898668093_0.doc @ 52149 @
34 | 0073-1-7388 | KNX Technical Reference Manual
®
Object name
Data type
1 Bit EIS1 / DPT 1.001
1 Bit EIS1 / DPT 1.001
Data type
1 Bit EIS1 / DPT 1.001
1 Byte EIS6 / DPT 5.001
1 Byte EIS14 / DPT 5.010
1 Byte EIS14 / DPT 6.010
2 Byte EIS5 / DPT 9.xxx
2 Byte EIS10 / DPT 8.018
2 Byte EIS10 / DPT 7.001
1 Bit EIS9 / DPT 14.xxx
1 Bit EIS6 / DPT 5.001
1 Byte EIS14 / DPT 5.010
1 Byte EIS14 / DPT 6.010
2 Byte EIS5 / DPT 9.xxx
2 Byte EIS10 / DPT 8.018
2 Byte EIS10 / DPT 7.001
1 Byte EIS9 / DPT 14.xxx
Flags
C, W, U
C, W, T
Flags
C, W, U
C, W, U
C, W, U
C, W, U
C, W, U
C, W, U
C, W, U
C, W, U
C, W, U
C, W, U
C, W, U
C, W, U
C, W, U
C, W, U
C, W, U