ABB Busch-priOn Series Technical Reference Manual page 26

KNX Technical Reference Manual
Busch-priOn
Pos: 22.31 /Produkthandbuch - DIN-A4/Überschriften/2. Ebene/S - T/Stufenschalter, Wippe Links / Rechts @ 9\mod_1269437464625_15.doc @ 52803 @ 2
Step switch, rocker left/right
Pos: 22.32 /KNX/Applikationsbeschreibungen/Applikationen - App/Stufenschalter_Wippe_links_rechts/App. - Stufenschalter, Wippe Links / Rechts - DIN-A4 @ 9\mod_1269437349390_15.doc @ 52798 @
The application "Step switch, rocker left/right" facilitates step-type switching. This means that the user can trigger different
switching processes with each new operation of the rocker switch.
Example:
First operation switches lamp 1 on.
Second operation switches lamp 1 off and lamp 2 on.
Third operation switches lamp 2 off and lamp 3 on.
Fourth operation switches lamp 3 off and lamp 1 on.
etc.
Up to five switching steps can be activated.
In each case, the application "Step switch, button oriented" makes a separate set of parameters and communication objects
available for the right or left side of the rocker.
The application enables realising switching functions via one rocker side while the other rocker side can be assigned with an
additional "button orientated" function.
Step switch objects, rocker left/right
No. Object name
0 Switching step 1
1 Switching step 2
2 Switching step 3
3 Switching step 4
4 Switching step 5
Pos: 22.33 /Produkthandbuch - DIN-A4/Überschriften/2. Ebene/M - O/Mehrfachbetätigung, Wippe Links / Rechts @ 9\mod_1269438670421_15.doc @ 52813 @ 222
Multiple operation, rocker left/right
Pos: 22.34 /KNX/Applikationsbeschreibungen/Applikationen - App/Mehrfachbetätigung_Wippe_links_rechts/App. - Mehrfachbetätigung, Wippe Links / Rechts - DIN-A4 @ 9\mod_1269437591625_15.doc @ 52808 @
With the "Multiple operation, rocker left/right" application, a differentiation can be made between a single, double, triple,
quadruple or quintuple operation of the rocker. Different values can be sent out for every operation: single, double, triple,
quadruple, or quintuple.
The application "Multiple operation, rocker left/right" makes a separate set of parameters and communication objects
available in each case for the right or left side of the rocker. It is therefore possible to realise a multiple operation via one
side of the rocker and assigning a "button-orientated" function to the other side of the rocker.
Multiple operation objects, rocker left/right
No. Object name
0 Switching 1, multiple operation (1 Bit)
0 Switching 1, multiple operation (1 Byte 0..100 %)
0 Switching 1, multiple operation (1 Byte 0..255)
0 Switching 1, multiple operation (2 Byte Float)
0 Switching 1, multiple operation (2 Byte Signed)
0 Switching 1, multiple operation (2 Byte Unsigned)
0 Switching 1, multiple operation (4 Byte Float)
0 Switching 1, multiple operation (4 Byte Signed)
0 Switching 1, multiple operation (4 Byte Unsigned)
26 | 0073-1-7388 | KNX Technical Reference Manual
®
Data type
1 Bit EIS1 / DPT 1.001
1 Bit EIS1 / DPT 1.001
1 Bit EIS1 / DPT 1.001
1 Bit EIS1 / DPT 1.001
1 Bit EIS1 / DPT 1.001
Data type
1 Bit EIS1 / DPT 1.001
1 Byte EIS6 / DPT 5.001
1 Byte EIS14 / DPT 5.010
2 Byte EIS5 / DPT 9.xxx
2 Byte EIS10 / DPT 8.001
2 Byte EIS10 / DPT 7.001
4 Byte EIS9 / DPT 14.xxx
4 Byte EIS11 / DPT 13.001
4 Byte EIS11 / DPT 12.001
Flags
C, W, T
C, W, T
C, W, T
C, W, T
C, W, T
Flags
C, W, T
C, W, T
C, W, T
C, W, T
C, W, T
C, W, T
C, W, T
C, W, T
C, W, T