Value Sender, 2 Objects, Rocker Left/Right - ABB Busch-priOn Series Technical Reference Manual

KNX Technical Reference Manual
Busch-priOn
Pos: 22.21 /Produkthandbuch - DIN-A4/Überschriften/2. Ebene/U - Z/Wertsender, 2 Objekte, Wippe Links / Rechts @ 9\mod_1269431015140_15.doc @ 52763 @ 22

Value sender, 2 objects, rocker left/right

Pos: 22.22 /KNX/Applikationsbeschreibungen/Applikationen - App/Wertsender_2_Objekte_Wippe_links_rechts/App. - Wertsender, 2 Objekte, Wippe Links / Rechts - DIN-A4 @ 9\mod_1269428977390_15.doc @ 52758 @
With the "Value sender, 2 objects, rocker left/right" application, two telegrams with predefined values from two different
communication objects can be sent out by actuation and/or upon release of the rocker.
The application "Value sender, 2 objects, rocker left/right" makes a separate set of parameters and communication objects
available in each case for the right or left side of the rocker.
For example, the application facilitates the sending out of a switching function and a floating point value with the actuation of
one rocker side and assigning an additional "button orientated" function to the other side of the rocker.
Value sender objects, 2 objects, rocker left/right
No. Object name
0 Switching (rising flank) (1 Bit)
0 Switching (rising flank) (1 Byte 0..100 %)
0 Switching (rising flank) (1 Byte 0..255)
0 Switching (rising flank) (2 Byte Float)
0 Switching (rising flank) (2 Byte Signed)
0 Switching (rising flank) (2 Byte Unsigned)
0 Switching (rising flank) (4 Byte Float)
0 Switching (rising flank) (4 Byte Signed)
0 Switching (rising flank) (4 Byte Unsigned)
1 Switching (falling flank) (1 Bit)
1 Switching (falling flank) (1 Byte 0..100 %)
1 Switching (falling flank) (1 Byte 0..255)
1 Switching (falling flank) (2 Byte Float)
1 Switching (falling flank) (2 Byte Signed)
1 Switching (falling flank) (2 Byte Unsigned)
1 Switching (falling flank) (4 Byte Float)
1 Switching (falling flank) (4 Byte Signed)
1 Switching (falling flank) (4 Byte Unsigned)
Pos: 22.23 /Produkthandbuch - DIN-A4/Überschriften/2. Ebene/U - Z/Wertdimmsensor, Wippe Gesamt @ 9\mod_1269431267671_15.doc @ 52773 @ 22
Value dimming sensor, rocker total
Pos: 22.24 /KNX/Applikationsbeschreibungen/Applikationen - App/Wertdimmsensor_Wippe_gesamt/App. - Wertdimmsensor, Wippe Gesamt - DIN-A4 @ 9\mod_1269431145656_15.doc @ 52768 @
With the application "Value dimming sensor, rocker total", it is possible to send 1-byte telegrams by actuating the rocker.
Each actuation of the left or right side of the rocker will increase or reduce a 1-byte value (percent or values from 0 to 255).
The 1-byte value can be connected with 1-byte brightness value objects of dimming actuators. This allows a dimming
actuator to be dimmed brighter or darker with the rocker via value telegrams.
Value dimming sensor objects, rocker total
No. Object name
0 Value
Pos: 22.25 /Spezial/Neues Layout 2010/Steuermodule_Neues_Layout_2010/++++++++++++ Seitenumbruch ++++++++++++ @ 9\mod_1268898668093_0.doc @ 52149 @ 2
24 | 0073-1-7388 | KNX Technical Reference Manual
®
Data type
1 Bit EIS1 / DPT 1.001
1 Byte EIS6 / DPT 5.001
1 Byte EIS14 / DPT 5.010
2 Byte EIS5 / DPT 1.xxx
2 Byte EIS10 / DPT 8.001
2 Byte EIS10 / DPT 7.001
4 Byte EIS9 / DPT 14.xxx
4 Byte EIS11 / DPT 13.001
4 Byte EIS11 / DPT 12.001
1 Bit EIS1 / DPT 1.001
1 Byte EIS6 / DPT 5.001
1 Byte EIS14 / DPT 5.010
2 Byte EIS5 / DPT 9.xxx
2 Byte EIS10 / DPT 7.001
2 Byte EIS10 / DPT 8.001
4 Byte EIS9 / DPT 14.xxx
4 Byte EIS11 / DPT 13.001
4 Byte EIS11 / DPT 12.001
Data type
1 Byte / EIS6/14 / DPT 5.001 /
DPT 5.010
Flags
C, W, T, U
C, W, T, U
C, W, T, U
C, W, T, U
C, W, T, U
C, W, T, U
C, W, T, U
C, W, T, U
C, W, T, U
C, W, T, U
C, W, T, U
C, W, T, U
C, W, T, U
C, W, T, U
C, W, T, U
C, W, T, U
C, W, T, U
C, W, T, U
Flags
C, W, T, U