Media Control, Video Player - ABB Busch-priOn Series Technical Reference Manual

Pos: 22.47 /Produkthandbuch - DIN-A4/Überschriften/2. Ebene/M - O/Mediensteuerung Video-Player @ 9\mod_1269501501586_15.doc @ 52871 @ 2

Media control, video player

Pos: 22.48 /KNX/Applikationsbeschreibungen/Display - GUI/Mediensteuerung Video-Player/App. - Mediensteuerung Video-Player - DIN-A4 @ 9\mod_1269500928769_15.doc @ 52866 @ 2
A CD player can be remotely controlled via the bus using the "Media control CD player" application.
The symbols for "On/Off", "Player control" and "Volume" are shown first on the display. Via the push-button/rotary control
element, the user can access a submenu ("Player control" and "Volume") or can switch directly on or off via a push-button
operation.
In the submenu "Player control" the symbols for Start, Stop, Forward etc. are shown on the display. By turning the push-
button/rotary control element, the user can select the desired function (focus) and trigger it with a push-button operation.
If the volume is to be regulated, a special volume symbol is shown on the display which signals the user that: a turn to the
right increases the volume and a turn to the left reduces the volume.
A feedback signal from the connected actuator can not be shown here.
Depending on the function, telegrams to the video player control are sent out for "Video on/off", "Video selection", "Video
play", "Video stop", "Video pause", "Video rewind", "Video fast-forward", "Video volume". In addition, the function can be
temporarily blocked via an additional 1-bit "Enable" communication object.
Hint:
The function is practical only when a corresponding actuator (video actuator) for video player activation is used as
receiver for the sent out telegrams.
Media control objects, video player
No. Object name
0 Enable
1 Video On, Off
2 Video Play
3 Video Stop
4 Video Pause
5 Video Forward (Video Rewind)
6 Video Rewind (Video Forward)
7 Video Volume
Pos: 22.49 /Produkthandbuch - DIN-A4/Überschriften/2. Ebene/G - L/Kurzzeittimer @ 9\mod_1269501915203_15.doc @ 52882 @ 22
Short-time timer
Pos: 22.50 /KNX/Applikationsbeschreibungen/Display - GUI/Kurzzeittimer/App. - Kurzzeittimer - DIN-A4 @ 9\mod_1269501730439_15.doc @ 52877 @
Via the alarm or timer function there is the option of triggering an acoustic signal at a specific time or after expiration of an
entered time.
The "short-time timer" application displays a timer function. There is the option here of triggering an acoustic signal via the
internal speaker after expiration of an entered time. The time (up to 12 h 59 min) is set by the user via the push-button/rotary
control element. After expiration of the set time, a signal tone is triggered on the unit which can be confirmed via the push-
button/rotary control element.
The set "Value for timer start" (ON or OFF) is sent out via a 1-bit "Timer status" communication object at timer start. The set
"Value for timer expiration" (ON or OFF) is sent out at timer expiration.
Short-time timer objects
No. Object name
0 Adjusting (1 Bit)
0 Adjusting (1 Byte)
1 Moving (1 Bit)
1 Moving (1 Byte)
Pos: 22.51 /Spezial/Neues Layout 2010/Steuermodule_Neues_Layout_2010/++++++++++++ Seitenumbruch ++++++++++++ @ 9\mod_1268898668093_0.doc @ 52149 @ 22
Data type
1 Bit EIS1 / DPT 1.001
1 Bit EIS1 / DPT 1.001
1 Bit EIS1 / DPT 1.001
1 Bit EIS1 / DPT 1.001
1 Bit EIS1 / DPT 1.001
1 Bit EIS1 / DPT 1.001
1 Bit EIS1 / DPT 1.001
4 Bit EIS2 / DPT 3.007
Data type
1 Bit EIS7 / DPT 1.007
1 Byte EIS6 / DPT 5.001
1 Bit EIS7 / DPT 1.008
1 Byte EIS6 / DPT 5.001
KNX Technical Reference Manual | 0073-1-7388 | 31
Flags
C, T, U
C, W, T, U
C, T
C, T
C, T
C, T
C, T
C, T
Flags
C, W, T, U
C, W, T, U
C, W, T, U
C, W, T, U