Avery Dennison AP 4.4 User Manual page 13

05/04 Rev. 1.2-03
Standalone
Mode
USER MANUAL
AP4.4 – AP5.4
More information on message reports and a detailed list of all messages can
be found under "Status Reports".
(For AP 5.4 only)
In standalone mode, the print jobs are not transmitted via a data cable, but
are stored on a CF-Card. From there, they can be selected using the printer
display or an keyboard connected to the printer.
For detailed information about using the standalone mode, refer to topic
section Advanced Applications.
13
Setup & Operation