- programming of audio alarm threshold levels of photon-ionizing radiation DE;
- surface beta-particles flux density measurement;
- programming of audio alarm threshold levels of surface beta-particles flux density;
- indication of operator's DE accumulation time;
- indication and correction of real time;
- switching audio signaling of registered gamma quanta and beta-particles on/off;
- switching display backlight on/off.
2.3.3 Operation procedure of the dosimeter
2.3.3.1 Switching the dosimeter on/off
Press shortly the MODE button to switch the dosimeter on. The information displayed on
the LCD, blinking of the light-emitting diode below the LCD and audio signaling of the
registered gamma quanta show that the dosimeter is on. Press the MODE button once again
and hold it pressed for six seconds to switch the dosimeter off.
26