ECOTEST MKS-05 TERRA Operating Manual page 41

3.1.2 Safety measures
Safety measures during TM fully comply with safety measures stated in item 2.3.1 of the
present OM.
3.1.3 Maintenance procedure of the dosimeter
3.1.3.1 External examination
External examination of the dosimeter should be performed in the following order:
a) check the technical condition of surface, inspect for integrity of seals, absence of
scratches, traces of corrosion, surface damages of the dosimeter;
b) check the condition of clamps in the battery compartment.
3.1.3.2 Delivery kit completeness check
Check if the delivery kit is complete according to Table 1.2.
3.1.3.3 Operability check of the dosimeter
3.1.3.3.1 Operability check of the dosimeter is performed according to item 2.2.3 of the
present OM.
40