ECOTEST MKS-05 TERRA Operating Manual page 23

2.2.3.4 Press shortly the MODE button and make sure the dosimeter has entered the mode
of surface beta-particles flux density measurement, which is indicated by the blinking light-
emitting diode opposite the appropriate mnemonic symbol below the LCD, and by audio
signals following the detection of every beta-particle or gamma quantum.
2.2.3.5 Press shortly the MODE button and make sure the dosimeter has entered the mode
of operator's DE accumulation time indication, which is shown by blinking of all digits and a
non-blinking comma between the two pairs of digits. The last right digit changes every minute
per one unit.
2.2.3.6 Press shortly the MODE button and make sure the dosimeter has entered the mode
of real time indication, which is indicated by a one-second blinking comma between the two
pairs of digits.
22