Siemens SIMATIC Box PC 840 Manual page 92

Configuring the SIMATIC Box PC 840
"Hardware Options" Field
The following submenu appears when you select the "Hardware Options" field in
the main menu:
Main
PCI - MPI / DP:
On Board Ethernet
Ethernet Adress:
LAN Remote Boot:
Legacy USB Support:
SafeCard functions:
Fan Control:
CRT / LCD selection:
LCD-Screensize:
PS/2 Mouse:
F1 Help
ESC Exit
Figure 5-7 "Hardware Options" Submenu
The parameters of the interfaces present on the motherboard are set here.
Entry
PCI-MPI/DP *
On Board
Ethernet
Ethernet
Address
LAN Remote
Boot
Legacy USB
Support
SafeCard
functions
1
* Optional product feature
5-10
PhoenixBIOS Setup-Utility
Hardware Options
[Enabled]
[Enabled]
080006247000
[Enabled]
[Disabled]
[Enabled]
[Enabled]
[SIMULTAN]
[Graph& Text Expand]
[Enabled]
Select Item + / – Change Values
Select Menu Enter Select
1
Enables the CP5611-compatible MPI/DP interface. The resourses are
managed by the BIOS PCI Plug and Play mechanism.
[Enabled]
The Ethernet port on the motherboard is enabled.
[Disabled]
The Ethernet port on the motherboard is disabled.
The individual Ethernet address is entered here.
[Enabled]
Booting using a connected LAN is possible. The
respective boot source is displayed as
Intel Boot-Agent in the boot sequence menu.
[Disabled]
Booting using LAN is not possible.
[Disabled]
Default setting for operating system with its own
USB support.
[Enabled]
This setting makes it possible for non-USB capable
operating systems to be used.
[Enabled]
On board monitoring functions are enabled.
[Disabled]
No monitoring functions.
The relevant driver and the application must be started for operation of
the monitoring functions.
Item Specific Help
Enable or disable the
PCI - Multi Point
Interface (MPI / DP)
F9 Setup Defaults
Sub-Menu F10 Save and Exit
Meaning
SIMATIC Box PC 840 Manual
A5E00085984-04