Removal And Installation Of The Cd Rom Or Cd Rw/Dvd Drive - Siemens SIMATIC Box PC 840 Manual

4.5.4

Removal and Installation of the CD ROM or CD RW/DVD Drive

The removal and installation of the CD drive takes place with the same steps as for
the floppy drive.
1. Remove the drive holder as described in Section 4.5.2.
2. Undo the four screws of the drive.
3. Lift the drive upwards out of the drive holder.
4. Proceed in the reverse order to fit the new drive.
Fixing screws of the drive
Figure 4-14 Installation of the CD ROM, CD RW/DVD Drive
SIMATIC Box PC 840 Manual
A5E00085984-04
SIMATIC Box PC 840 Expansions
Fixing screws of the drive
4-19