Approvals And Certifications; Disposal - Danfoss VLT Midi Drive FC 280 Operating Manual

Introduction
1 1

1.5 Approvals and Certifications

For compliance with the European Agreement concerning
International Carriage of Dangerous Goods by Inland
Waterways (ADN), refer to the chapter ADN-compliant Instal-
lation in the VLT
The frequency converter complies with UL 508C thermal
memory retention requirements. For more information,
refer to the chapter Motor Thermal Protection in the VLT
Midi Drive FC 280 Design Guide.
Applied standards and compliance for STO
Using STO on terminals 37 and 38 requires fulfillment of all
provisions for safety including relevant laws, regulations,
and guidelines. The integrated STO function complies with
the following standards:
•
IEC/EN 61508:2010, SIL2
•
IEC/EN 61800-5-2:2007, SIL2
•
IEC/EN 62061:2015, SILCL of SIL2
•
EN ISO 13849-1:2015, Category 3 PL d

1.6 Disposal

6
089
®
Midi Drive FC 280 Design Guide.
Do not dispose of equipment containing
electrical components together with
domestic waste.
Collect it separately in accordance with
local and currently valid legislation.
Danfoss A/S © 10/2017 All rights reserved.
®
VLT Midi Drive FC 280
®
MG07A402