Hitachi CS 30Y Handing Instructions page 10

English
WHAT IS WHAT?
1. Lock-off button: Button that prevents the accidental
operation of the trigger.
2. Oil tank cap: Cap for closing the oil tank.
3. Saw chain: Chain, serving as a cutting tool.
4. Guide bar: The part that supports and guides the saw
chain.
5. Spiked bumper: Device for acting as a pivot when in
contact with a tree or log.
6. Oil sight glass: Window to check chain oil amount.
7. Chain brake: Device for stopping or locking the saw
chain.
8. Front handle: Support handle located at or towards the
front of the main body.
9. Rear handle: Support handle located on the top of the
main body.
10. Switch: Device activated by the fi nger.
11. Side cover: Protective cover to the guide bar saw chain,
clutch and sprocket when the chain saw is in use.
12. Tension dial: Device for adjusting tension of saw chain
13. Knob: Knob for securing tension dial and side cover
14. Chain case: Case for covering the guide bar and saw
chain when the unit is not being used.
15. Plug clip: A tool to prevent the power plug from slipping
free of an extension cord's socket.
10
(Original instructions)
4
2
3
5 6
8
9
12
11
10
14
1
7
13
15