YASKAWA SI-EN3/V Installation Manual page 26

5 Installation Procedure
Only use cables recommended for EtherNet/Industrial Protocol (EtherNet/IP
Using a cable not specifically recommended may cause the option or drive to
malfunction.
The use of CAT5e or equivalent Shielded Twisted Pair (STP) cable is
recommended.
Refer to the ODVA website for more information on network cabling (http://
www.odva.org).
Connection Diagram
V1000
EtherNet/IP Master EtherNet/IP Cable
<1> The ground wire provided in the option shipping package must be connected during installation.
16.
Attach the option cover by aligning the tabs with the mounting holes, seat the front
cover into place, and tighten the screw on the front.
EN 26
Power
Figure 19 Wiring Diagram
YASKAWA ELECTRIC TOBP C730600 60A V1000 Option EtherNet/IP Installation Manual
R U
S V
T W
V1000
SI-EN3/V
EtherNet/IP
Option
FE
TM ).
M Motor
<1>