YASKAWA SI-EN3/V Installation Manual page 19

Figure 5
Figure 5 Remove the Bottom Cover on an IP20/Open-Chassis Drive
(Models CIMR-VBA0001B to BA0003B and 2A0001B to 2A0006B)
Figure 6
V1000
Terminal Cover
4.
On IP20/Open-Chassis models, connect the drive side of the ground wire to the
drive ground terminal.
Note: The four different ground wires packaged with the option connect the option to different drive
models. Select the proper ground wire depending on drive size. Refer to
selection by drive model.
Figure 7
V1000
Figure 7 Connect the Ground Wire on an IP20/Open-Chassis Drive
YASKAWA ELECTRIC TOBP C730600 60A V1000 Option EtherNet/IP Installation Manual
Figure 6 Remove the Terminal Cover and Bottom Cover on
an IP20/Open-Chassis Drive (Models CIMR-VBA0006B to
BA0018B; 2A0008B to 2A0069B; 4A0001B to 4A0038B)
Ground wire
V1000
Option unit
connector
Screw size: M3
Ground terminal
5 Installation Procedure
Bottom Cover
Table 7 for ground wire
Drive-side
connector
Screw size:
M3.5 to M6
Ground wire
EN 19