Preliminary Work; Heater Installation Location - Webasto Thermo Top P Installation Instructions Manual

Preliminary Work

WARNING!
- Disconnect the battery "earth" or "ground" connection.
- Depressurize the cooling system.
- Copy the factory number from the original type label to the duplicate type label.
- Remove years that do not apply from the duplicate label.
- Attach the duplicate label (type label) in the appropriate place.
- Remove the air filter together with the intake hose.
- Remove the wiper arms.
- Remove the coolant reservoir cap.
- Remove the coolant reservoir.
- Open the fuel tank cap, ventilate the tank.
- Close the tank cap again.
- Open the right-hand fuel sender service lid.
- Remove the fuel-tank sending unit in accordance with the manufacturers specifications.
- Remove the underride protection
- Remove the fuse box of the central electrical box.
- Take off the cover of the relay box for the central electrical box (only with Climatronic).
- Remove the A/C control panel according to the manufacturer's instructions (only with Climatronic).
Please remove page 33 of the "Operating instructions for the end customer" and add this to the vehicle
operating instructions.
1
1

Heater installation location

1 Heater
VW Polo
Installa-
tion loca-
tion
5