Table of Contents
Advertisement
2 SYSTEM CONFIGURATIONS
(4) Software packages supported
Q00J/Q00/Q01CPU
Q02/Q02H/Q06H/
Q12H/Q25HCPU
Q12PH/Q25PHCPU
If installed in a MELSECNET/H
remote I/O station
(5) Connector
2 - 2
Correspondence between systems which use QD62 (E/D) and software
packages are as shown below.
The GX Developer is necessary when using a QD62 (E/D).
Single PLC
system
Multiple PLC
system
Single PLC
system
Multiple PLC
system
Single PLC
system
Multiple PLC
system
For the QD62(D/E), the connector is sold separately.
See Section 4.3 and make separate arrangements for the connector.
Software Version
GX Developer
Version 7 or later
(cannot be used with the
SW0D5C-QCTU-E 50F or
Version 8 or later
SW0D5C-QCTU-E 00A or
Version 4 or later
SW0D5C-QCTU-E 50F or
Version 6 or later
(cannot be used with the
Version 7.10L or later
SW0D5C-QCTU-E 50F or
SW0D5C-QCTU-E 50F or
Version 6 or later
MELSEC-Q
GX Configurator-CT
Version 1.10L or later
earlier versions)
later
later
Version 1.13P or later
earlier versions)
later
2 - 2
2
Advertisement
Table of Contents
