Table of Contents
Advertisement
7 UTILITY PACKAGE (GX Configurator-CT)
7 - 12
[Explanation of items]
(1) Explanation of the command buttons
Make text file
End setup
Cancel
POINT
Initial settings are stored in the intelligent module parameters. Once the initial
settings are written to the CPU module, they can be enabled by performing STOP
RUN
STOP
RUN operations for the CPU module, turning the power OFF
and then ON, or resetting the CPU module.
If the initialization settings have been written by a sequence program, the
initialization settings will be executed during the STOP
Arrange so that the initial settings written by the sequence program are re-executed
during the STOP
RUN of the CPU module.
Outputs the screen display in a text file format.
Confirms the entry of set data and ends the operation.
Cancels the set data and ends the operation.
MELSEC-Q
RUN of the CPU module.
7 - 12
Advertisement
Table of Contents
