1 OVERVIEW
1 - 3
(7) The preset function/counter selection function can be executed
using an external control signal
By applying voltage to the preset terminal/function start terminal of an external
terminal, preset function/counter function selection can be executed.
(8) Easy settings using the utility package
A utility package is sold separately (GX Configurator-CT).
The utility package is not a required item. However, it can be used to set initial
settings and automatic refresh settings onscreen, reduce sequence programs,
and check settings and operating status.
(9) A blown fuse in the external output section can be detected
A blown fuse in the external output section can be detected; it is notified by the
input signal X and the LED display on the module.
MELSEC-Q
1 - 3