Changing The Floppy Disk Drive - Fujitsu PRIMERGY 400 Operating Manual

System expansions for rack server

Changing the floppy disk drive

Ê
Open the server (see
Ê
Disconnect the cables from the floppy disk drive.
Ê
Remove the two screws (1) and withdraw the floppy disk drive from the bay (2).
Ê
Push the new floppy disk drive into the bay (1) and secure it with the two screws (2).
Ê
Connect the cables to the floppy disk drive again.
Ê
Close the server (see
76
"Opening the server").
"Assembling the server").
1
2
2
1
Accessible drives
A26361-K632-Z100-1-7619