Power Cord Selection; For The United States And Canada - Fujitsu PRIMERGY 400 Operating Manual

Important notes

Power cord selection

For the United States and Canada

Use a UL listed and CSA labeled cord set consisting of a three-conductor cord with a maximum
length of 15 feet.
For units that stand on a desk or table, type SVT or SJT cord sets shall be used.
For units that stand on floor, only SJT type cord sets shall be used.
The cord set must be selected according to the current rating for your unit. Please consult Table A
for the selection criteria for power cords used in the United States and Canada.
Table A:
Cord Type
SJT
SVT
For units set at 115 V:
use a parallel blade, grounding type attachment
plug rated 15 A, 125 V.
8
Size of Conductors
in Cord
18 AWG
16 AWG
14 AWG
18 AWG
17 AWG
The power cord for this unit has been packed
separately and has been selected for use in the
appropriate country. It must be used to prevent
electric shock. Use the following guidelines if it
is necessary to replace the original cord set.
The female receptacle of the cord set must meet
CEE-22 requirements (see Figure).
Maximum Current
For units set at 230 V (domestic use):
use a tandem blade, grounding type attachment
plug rated 15 A, 250 V.
Power cord selection
Rating of Unit
10 Amps
12 Amps
12 Amps
10 Amps
12 Amps
A26361-K632-Z100-1-7619