Table of Contents
Advertisement
Installation
a
Ê
Hook the two extending units into the oblong holes of the support uprights at the appropriate
height with the hooks on the back. The mounting plates of the extending units with the beveled
corners (a) must face toward the front.
Ê
Screw the hooked-in extending units into the rack (1) with the No. 5 allen key provided. Please
note that the guide nubs of the extending rails next to the spring nuts must fit into the holes in
the support uprights.
Ê
Pull out the mounted extending units completely.
Ê
Press the locking spring (a) at the back of the pulled-out extending rail and pull out (1) the inner
rail (b).
18
a
1
Installing the rack server
1
b
A26361-K632-Z100-1-7619
Advertisement
Table of Contents
