For The United Kingdom - Fujitsu PRIMERGY 400 Operating Manual

Power cord selection
For units set at 230 V (outside of the United States and Canada):
use a cord set consisting of a minimum AWG according to Table A and a grounding type attachment
plug rated 15 A, 250 V. The cord set should have the appropriate safety approvals for the country in
which the equipment will be installed and should be marked HAR.

For the United Kingdom

Should the plug on the flexible cord not be of the type for your socket outlets, do not use an adapter
but remove the plug from the cord and discard. Carefully prepare the end of the supply cord and fit a
suitable plug.
WARNING
THIS APPLIANCE MUST BE EARTHED
IMPORTANT
The wires in this mains lead are colored in accordance with the following code:
Green and Yellow:
Blue:
Brown:
As the colors of the wires in the mains lead of this appliance may not correspond with the colored
markings identifying the terminals in your plug, proceed as follows:
·
The wire which is colored Green and Yellow must be connected to the terminal in the plug
which is marked with the letter E or by the earth symbol or colored Green or Green and Yellow.
·
The wire which is colored Blue must be connected to the terminal which is marked with the
letter N or colored Black.
·
The wire which is colored Brown must be connected to the terminal which is marked with the
letter L or colored Red.
A26361-K632-Z100-1-7619
Earth
Neutral
Live
Important notes
9