Table of Contents
Advertisement
Important notes
In this chapter you will find information regarding safety which it is essential to take note of when
working with your server. The manufacturer's notes contain helpful information on your server.
Safety
This device complies with the pertinent safety regulations for information technology, including
electric office machines for use in an office environment. If you have any questions, contact your
sales outlet or our customer service center.
The safety information is contained in the manual " Safety, Guarantee and Ergonomics". The
following outlines some of the most important safety information:
•
During installation and before operating the device, please observe the instructions on
environmental conditions in the chapter entitled
the chapter "Installation".
•
The ON/OFF switch and the main switch do not disconnect the server from the line voltage. To
disconnect the line voltage completely, remove the power plug from the grounded power outlet.
•
When cleaning the Server, observe the relevant notes in the chapter
operation".
•
When connecting and disconnecting cables, observe the relevant notes in the chapter
"Installation".
•
Replace the lithium battery on the system board in accordance with the instructions in the
Technical Manual for the system board.
•
The CD-ROM drive contains a light-emitting diode (LED), classified according to IEC 825-
1:1993:LASER CLASS 1.
•
Keep this Operating Manual together with your device. If you pass on the device to third
parties, you should include this manual.
•
Caution: components on the system board can get very hot.
•
Please check whether the server is set to the local line voltage (see chapter "Installation"
section
"Connecting the server to the line
A26361-K632-Z100-1-7619
"Technical
data" as well as the instructions in
voltage").
"Preparation for use and
5
Advertisement
Table of Contents
