Assembling The Server - Fujitsu PRIMERGY 400 Operating Manual

Assembling the server

If you wish to install or remove accessible drives, then also remove the control panel trim plate.
Ê
Press the two retaining clips of the control panel trim plate behind the front panel firmly
downward (1), fold out the control panel trim plate (2) and remove it (3).
Assembling the server
If you have inserted or removed an accessible drive, you must refit the control panel trim plate.
Ê
If you have installed an accessible drive, then remove the corresponding plastic trim plate from
the control panel trim plate (1).
Ê
If you have removed an accessible drive, then remount the corresponding plastic trim plate in
the control panel trim plate (2).
A26361-K632-Z100-1-7619
1
1
2
1
System expansions for rack server
2
1
3
69