Fujitsu PRIMERGY 400 Operating Manual page 55

Assembling the server
Mounting housing side cover
Ê
Insert the housing side cover at the bottom of the server (1), push it forward as far as possible
(2) and fold it up onto the server (3).
Ê
Push the side cover to the back as far as the stop (1).
Ê
Screw the housing side cover into place with the knurled screws removed previously (2).
Ê
If you have also removed the right-hand side cover, replace it by following the same procedure.
Ê
Plug in at the mains.
A26361-K632-Z100-1-7619
1
3
2
1
1
2
1
System expansions for tower server
2
2
47