VersaLogic VL-EBX-37 Reference Manual page 14

OS Installation
CD-ROM
1. Install Memory

Insert DDR3 DRAM module(s) into SO-DIMM sockets J13 and J29 and latch them into
place. If you install only one module, you must install it in the top socket, J13. If you use
DDR3 DRAM combined with a solid state drive (SSDDR3), you must install it in socket
J13.
2. Attach Cables and Peripherals

Plug the LVDS adapter cable VL-CBR-201x into socket J31 on the bottom of the board.
Attach the adapter cable to the LVDS display. (On models A and F, socket J33 can
alternately be used.)

Plug the USB CD-ROM drive, keyboard, and mouse into on-board USB ports (J2, J3, J4,
J8, J9, or J10).

Plug the SATA data cable VL-CBR-0701 into socket J1 or J7, and attach the SATA hard
drive to the cable.

Attach the ATX SATA power cable (VL-CBR-0401) to the ATX power supply and to
the SATA hard drive.
EBX-37 Reference Manual
CD-ROM
Drive
USB
USB
USB Keyboard
and Mouse
Figure 2. Typical Start-up Configuration
ATX
Power
VL-CBR- 0401
Supply
VL-CBR- 2022
VL-EBX-37
J6
Mamba
USB
J1/7
J31
VL-CBR-201x LVDS
Configuration and Setup
SATA
Hard Drive
VL-CBR- 0701
LVDS
8