Processor - HP Apollo 4200 Gen9 Maintenance And Service Manual

Remove the DIMM.
6.
To replace the component, reverse the removal procedure.

Processor

WARNING:
internal system components to cool before touching them.
CAUTION:
should attempt to replace or install the processor in this server.
CAUTION:
configurations must contain processors with the same part number.
CAUTION:
a processor socket cover or a processor and a heatsink.
CAUTION:
precautions before beginning any installation, removal, or replacement procedure. Improper
grounding can cause electrostatic discharge.
IMPORTANT:
installing the processor.
IMPORTANT:
To remove the component:
Power down the server (on page 17).
1.
Remove all power:
2.
Disconnect each power cord from the power source.
a.
Disconnect each power cord from the server.
b.
Remove the server from the rack (on page 27).
3.
To reduce the risk of personal injury from hot surfaces, allow the drives and the
To avoid damage to the processor and system board, only authorized personnel
To prevent possible server malfunction and damage to the equipment, multiprocessor
To prevent possible server overheating, always populate each processor socket with
To prevent damage to electrical components, take the appropriate anti-static
If installing a processor with a faster speed, update the system ROM before
Processor socket 1 must be populated at all times or the server does not function.
DRAFT - HP Confidential - DRAFT
Removal and replacement procedures 62