Two-Bay Sff Hot-Plug Rear Drive Backplane - HP Apollo 4200 Gen9 Maintenance And Service Manual

Remove the drive backplane.
7.
To replace the component, reverse the removal procedure.

Two-bay SFF hot-plug rear drive backplane

WARNING:
internal system components to cool before touching them.
CAUTION:
precautions before beginning any installation, removal, or replacement procedure. Improper
grounding can cause electrostatic discharge.
To remove the component:
Power down the server (on page 17).
1.
Remove the server from the rack (on page 27).
2.
Remove the access panel
3.
Remove the air baffle
4.
Disconnect all cables connected to the drive cage backplane.
5.
To reduce the risk of personal injury from hot surfaces, allow the drives and the
To prevent damage to electrical components, take the appropriate anti-static
("Access panel" on page 36).
("Air baffle" on page 37).
DRAFT - HP Confidential - DRAFT
Removal and replacement procedures 40