Dimm Slot Locations; System Maintenance Switch - HP Apollo 4200 Gen9 Maintenance And Service Manual

DIMM slot locations

DIMM slots are numbered sequentially (1 through 8) for each processor. The supported AMP modes use the
letter assignments for population guidelines.
The arrow points to the front of the server.

System maintenance switch

Position
S1
S2
S3
S4
S5
S6
S7
S8
S9
S10
S11
S12
To access the redundant ROM, set S1, S5, and S6 to on.
When the system maintenance switch position 6 is set to the On position, the system is prepared to erase all
system configuration settings from both CMOS and NVRAM.
CAUTION:
properly configure the server or data loss could occur.
Default Function
Off Off = iLO4 security is enabled.
On = iLO4 security is disabled.
Off Off = System configuration can be
changed.
On = System configuration is locked.
Off Reserved
Off Reserved
Off Off = Power-on password is enabled.
On = Power-on password is disabled.
Off Off = No function
On = ROM reads system configuration
as invalid.
Off Off = Set default boot mode to UEFI.
On = Set default boot mode to legacy.
— Reserved
— Reserved
— Reserved
— Reserved
— Reserved
Clearing CMOS and/or NVRAM deletes configuration information. Be sure to
DRAFT - HP Confidential - DRAFT
Component identification 134