Front Panel Leds And Buttons - HP Apollo 4200 Gen9 Maintenance And Service Manual

Front panel LEDs and buttons

Front panel LEDs and buttons in the LFF chassis
Front panel LEDs and buttons in the SFF chassis
Item Description
Health LED
1
NIC status LED
2
Front drive
3
health/thermal LED
Power On/Standby
4
button and system power
LED
1
Status
1 Solid green = Normal
Flashing green (1 Hz/cycle per sec) = iLO is rebooting
Flashing amber = System degraded
Flashing red (1 Hz/cycle per sec) = System critical
Solid green = Link to network
1
Flashing green (1 Hz/cycle per sec) = Network active
Off = No network activity
Solid green = Drives supported by the SAS expander are functional.
Solid amber = Failure or predictive failure of one or more drives supported by
the SAS expander.
Flashing amber (1 Hz/cycle per sec) = The temperature sensor in one or more
front drives is about to reach the thermal threshold. Immediately slide the drive
cage back into the chassis and keep it there until the LED turns green.
Off = No power present†
Solid green = System on
Flashing green (1 Hz/cycle per sec) = Performing power on sequence
Solid amber = System in standby
Off = No power present†
2
3
DRAFT - HP Confidential - DRAFT
2
3
4
Component identification 128