Configure The Transmitter - Emerson Rosemount 3100 Series Quick Installation Manual

Quick Installation Guide
00825-0100-4840, Rev AB
January 2008
S 3: C
TEP ONFIGURE THE
Configuration of the Rosemount 3100 Series transmitter can be done
with the Integral Display and Push-Buttons. Rosemount transmitter
models 3102 and 3105 can use a Rosemount 3490 Series Control
Unit, a 375 Field Communicator, or PC with AMS(TM) Suite: Intelligent
Device Manager.
NOTE:
If the transmitter was configured at the factory, it is not necessary to
proceed with this step, unless you need to verify / change the settings.
For detailed configuration steps, refer to the reference manual
(00809-100-4840).
Rosemount 3100 Series ultrasonic level transmitters can be
configured by using the Integral push-buttons and display.
Please refer the "Integral Display Menu (Model 3101)" diagram below
for the model 3101 menu structure and instructions to edit parameters.
For models 3102 or 3105, please refer to the "Integral Display Menus
(Models 3102/3105)" diagram on page 13.
10
Rosemount 3100 Series
T
RANSMITTER
Figure 10.